2pcs Yongnuo YN622N II + YN622N-TX i-TTL Wireless Flash Trigger Transceiver for Nikon Camera for Yongnuo YN565EX YN568EX. This product adopts flexible LCD menu control, supporting mixed use of the A/B/C three groups of flashes using i-TTL, manua, or super sync flash mode, can be adjusted the exposure compensation or flash output of each group. In addition, it supports setting different focal length(zoom)of the three groups of flash, the remote-controlled distance can reach 100M, supporting seven wireless channels and A/B/C three groups, and equipped with the AF-assist beam emitter. LCD screen display, multi-buttons quick operation.
The firmware can be upgraded through the USB interface. Support wireless shutter release function.
The focal length(zoom)of the A/B/C three groups of flash can be adjusted separately. Equipped with the AF focus assist light (can be disabled).
Grouping flash mode: i-TTL/Manual flash/Super sync. Supporting mixed use of the A/B/C three groups of flashes with i-TTL, Manual flash, or Super sync flash mode.The exposure compensation or flash output of A/B/C three groups of flashes can be adjusted separately. Shutter Sync: first curtain sync, second curtain sync and FP high-speed sync, the highest sync speed is 1/8000s. Support exposure compensation, flash value lock function(FVL). Support simulate (modeling) flash, red-eye reduction flash.
Support the flash zooming (auto). Super Sync (SS) time delay adjustment, for higher x-sync speed than the camera allows. The flash sync signal can be input through the PC port. Support the basic flash trigger (max sync speed is 1/250s) of standard hot shoe (non Nikon body).The above functions need to be used with the YN-622N transceiver. Nikon: D70, D70S, D80, D90, D200, D300S, D600, D700, D800, D3000, D3100, D3200, D5000, D5100, D5200, D5300, D7000, D7100. Yongnuo: YN-465N, YN-467N, YN-468II, YN-565N, YN-568N. Nikon: SB-400, SB-600, SB-700, SB-800, SB-900, SB-910.
When you prepare to upgrade YN-622N-TX first time, please download the driver and software package YN_Trigger_Updater. Zip, uncompress it and run YN_Trigger_Updater_Setup.
Exe to install the driver/software. Download the most update firmware package and unzip it. Turn off YN-622N-TX, keep pressing mode button and turn on it again. The screen will show firmware upgrade interface.
Connect the device to your PC via a USB cable. Run YN_Trigger_Updater from start menu.
Button and navigate to the firmware you download in step 2. Wait a few seconds until the device is detected. When is done, YN-622N-TX will be reset automatically and you can use the new version now.If any error is encountered when updating, please turn off and try again from step 3. 1 x YN-622N-TX Controller(batteries not included).
2 x YN-622N II Transceivers. 1 x LS-2.5/N1 Shutter Connecting Cable.
1 x LS-2.5/N3 Shutter Connecting Cable. We have engaged in E-commerce market for. Winning great reputation and respect from our peers and customers since we constantly hold the conviction.Customer is the most important , service comes first! Before you pay, please comfirm your address is correct. As the above is the policy of the courier company, we hope we can get your understanding and attention in this matter. We send it to worldwide. If you are satisfied with our service, pls. Your recognition will encourage us greatly and serve you better. The item "Yongnuo YN-622N-TX + 2pcs YN-622N II i-TTL Wireless Flash Trigger Set for Nikon" is in sale since Tuesday, October 24, 2017. This item is in the category "Cameras & Photo\Lighting & Studio\Flash Lighting\Slaves & Trigger Systems". The seller is "xianghuisportcamerasuit" and is located in shenzhen.
This item can be shipped worldwide.