In the optical transportation wireless flash shooting, the YN568EX III can used as master unit to trigger the YONGNUO and Canon EX series speedlite (except the YN585EX), supports 4 channels, realize wireless TTL, manual flash and stroboscopic flash. Ø Compatible With C and N's Optical Transportation Wireless Slave Flash. One YN568EX III can respectively accept the master unit of YN600EX-RT IIYN568EX IIYN568EX III600EX(II)-RT580EX IISB-910/900/800/700, Nikon built-in flash and Canon command and wireless signal of 7D/60D/600D, realizes external TTL and manual flash and stroboscopic flash.
The YN568EX III can synchronize with all shutter speeds, realize TTL and manual flash, the maximum shutter sync is up to 1/8000. Ø TTL Flash with High Guide Number. The YN568EX III is equipped with the USB interface, you can download the latest firmware from YONGNUO official website to upgrade the speedlite. Ø Support the Battery Remaining Power Real-time Display.
The YN568EX III is equipped with the battery electric power display function, allows you to check the battery remaining capacity easily. Ø High Speed Recycling System. The recycling time for full output just takes 2 seconds; you can get high speed current-return experience even without using brand new batteries, which will only takes 3-4 seconds.When the sound prompt system is enableddifferent sound modes will prompt different working conditions of the speedlite so as to allow you to focus on shooting process. Ø Equipped with the AF-assist Beam Emitter.
The YN568EX III is equipped with the AF-assist beam emitter, allows you to focus easily in dark environment. Supports automatic and manual zooming, the focal length can be varied between 24105mm.Ø Multiple Trigger Mode Supported. YN568EX III can be triggered by the camera set-top, PC synchronization trigger and wireless optical trigger off the camera. Ø Automatic Settings Saving, supports custom settings (Fn). Ø Equipped with Large-size LCD display and standard 2.5mm PC interface. Recycle Time: 2s(full output) /3-4s. Wireless Flash Function: Master, Slave, Off. 1x YN 568EX III Flash. Compatible With C and N's Optical Transportation Wireless Slave Flash.
One YN568EX III can respectively accept the master unit of YN600EX-RT IIYN568EX IIYN568EX III600EX(II)-RT580EX IISB-910/900/800/700, Nikon built-in Flash C command and built-in wireless single of 7D/60D/600D, it realizes wirelessTTL and manual flash and stroboscopic flash. TTL Flash with High Guide Number. Support the Battery Remaining Power Real-time Display. Automatic Settings Saving, supports custom settings (Fn). Equipped with Large-size LCD display and standard 2.5mm PC interface.Insulated Gate Bipolar Transistor (IGBT)? Support HSS, the High Speed Sync, up to 1/8000 second, M, MULTI, Sc, Sn, S1, S2?
Hot shoe TTL for Nikon? Guide Number 58 (ISO 100, 105mm)?
Flash Modes: TTL, M, Multi Mode? Auto and Manual Zooming Head 24 - 105mm? Auto Zoom for Sensor Size? Zoom Range 24,28 35 50 70 80 105mm?
Flash Time is around 1/200s-1/20000s? 8 levels of output control (1.128-1/1), 22 levels of fine tuning? Hot shoe, PC Port, USB Port? Off camera flash, high-speed sync, second-curtain sync, FEC, FEB, FEV, the electronic flash head zooming, sound prompt, automatically saving setting, power saving mode, overheat protection, custom function, firmware update. 1, Hot shoe TTL mode: Nikon D7400 D7300 D7200 D7100 D5600 D5500 D5400 D5300 D5200 D5100 D5000 D3500 D3400 D3300 D3200 D3100 D3000 D700 D300s D200 D100 D80 D90 D40 D40x D60 D4 D3.
2, Wirelss TTL Slave mode: Nikon Commander SU-800 Nikon SB-910, SB-900, SB-800, SB-700, Commander SU-800, Camera with CLS i-TTL system:D4, D3x, D3s, D3, D2x, D700, D300s, D300, D200, D7000, D90, D80 Canon 7D 6D 600D 650D Canon Flash 580EX II Commander Canon ST-E2. 1 x YN-568EX III Flash Speedlite for Nikon 1 x Mini Stand 1 x Flash Diffuser Cover for free 1 x Manual in English and Chinese 1 x Yongnuo Original box.This product adopts flexible LCD menu control, supporting mixed use of the A/B/C three groups of flashes using i-TTL, manual, or super sync flash mode, can be adjusted the exposure compensation or flash output of each group. In addition, it supports setting different focal length(zoom)of the three groups of flash, the remote-controlled distance can reach 100M, supporting seven wireless channels and A/B/C three groups, and equipped with the AF-assist beam emitter. LCD screen display, multi-buttons quick operation. The firmware can be upgraded through the USB interface. Support wireless shutter release function.
The focal length(zoom)of the A/B/C three groups of flash can be adjusted separately. Equipped with the AF focus assist light (can be disabled). Grouping flash mode: i-TTL/Manual flash/Super sync.Supporting mixed use of the A/B/C three groups of flashes with i-TTL, Manual flash, or Super sync flash mode. The exposure compensation or flash output of A/B/C three groups of flashes can be adjusted separately. Shutter Sync: first curtain sync, second curtain sync and FP high-speed sync, the highest sync speed is 1/8000s. Support exposure compensation, flash value lock function(FVL). Support simulate (modeling) flash, red-eye reduction flash. Support the flash zooming (auto). Super Sync (SS) time delay adjustment, for higher x-sync speed than the camera allows.
The flash sync signal can be input through the PC port. Support the basic flash trigger (max sync speed is 1/250s) of standard hot shoe (non Nikon body). The above functions need to be used with the YN-622N transceiver. YN-622N i-TTL wireless transceiver is a high performance 2.4G wireless flash trigger designed for Nikon users. Different photographic effects can be produced through setting the flash at 360 degrees.It supports i-TTL and manual flash, front-curtain sync, rear- curtain sync and high-speed sync(Auto FP), the highest sync speed is 1/8000s. It can remote change flash exposure compensation or flash output of each group, supports different flash modes. Supports the transmitter installed i-TTL flash, in addition, it supports the master unit on transmitter sets the parameters of each group. This product is a wireless transceiver design, the distance of remote control reaches 100M, supporting 7 wireless channels and A/B/C three groups, and with AF assist beam emitter function. Compatible flash mode: i-TTL, Manual flash.
Compatible Shutter sync: front-curtain sync, rear- curtain sync and high-speed sync(HSS/FP), the highest sync speed is 1/8000s. Support remote set the parameters of flash through the transceiver (Remote Control Mode). Support i-TTL/Manual/Repeating flash mode mix using(Mix Control Mode).Support the flash installed on transmitter(on-top flash)and supports i-TTL function. Support the use of master unit on transmitter sets the parameters of each group(Master Control Mode). Support modeling flash and red-eye reduction flash. Built-in AF assist beam emitter (AF Lamp).
Compatible with YongNuo/ Nikon series flashes. Support PC port triggering strobe flashes. PC port support front/rear curtain sync and high-speed sync(Super Sync)function. Support single-contact of camera & flash triggering (max sync speed is 1/250s). Compatible cameras/flashes is needed when using TTL function.The highest sync speed of some camera types is 1/4000s, some of flash or camera models may reach to 1/250s only or less if it doesn't support high sync speed. Nikon: D70, D70S, D80, D90, D200, D300S, D600, D700, D800, D3000, D3100, D3200, D5000, D5100, D5200, D5300, D7000, D7100. Yongnuo YN-465N, YN-467N, YN-468II, YN-565N, YN-568N. Nikon SB-400, SB-600, SB-700, SB-800, SB-900, SB-910.
2, Mix TTL, Remote Manual, and SuperSync Groups. 3, Syne mode front-curtain syne, rear-curtain sync, Hi-speed sync (Auto FP). 5, Trigger Interface: Hot shoe, PC. 6, Individual 1/3rd stop Manual Power and FEC adjustment. 7, Remote Flash Zoom in 3 groups, and Auto Zoom.
8, 2nd Curtain Sync, HSS, SuperSync. USB port for Firmware Updates. 11, Remote Shutter Release Function.12, Dedicated Buttons for Fast Adjustments. 2.5mm shutter release interface (We have two cables, one is for N1, other is for N3). 17, Improved Stability and Transmission Speed. 18, SuperSync Manual Timing Adjustment by Group. 19, Flash Value Lock function (FVL).
20, Modeling Flash & Red-Eye Reduction flash. YN622C II i-TTL wireless transceiver is a high performance 2.4G wireless flash trigger designed for Nikon users.
Function: Compatible flash mode: E-TTL, Manual flash Compatible Shutter sync. Front-curtain sync, rear- curtain sync and high-speed sync(HSS/FP), the highest sync speed is 1/8000s. Support remote set the parameters of flash through the transceiver (Remote Control Mode) Support E-TTL/Manual/Repeating flash mode mix using(Mix Control Mode) Support the flash installed on transmitter(on-top flash)and supports i-TTL function Support the use of master unit on transmitter sets the parameters of each group(Master Control Mode) Support FEC, FVL function Support modeling flash and red-eye reduction flash Support flash zooming (auto) Built-in AF assist beam emitter (AF Lamp) Settings saved automatically Compatible with YongNuo/ Nikon series flashes Support PC port triggering strobe flashes PC port support front/rear curtain sync and high-speed sync(Super Sync)function Support single-contact of camera & flash triggering (max sync speed is 1/250s).A:The EOS DSLR camera with. Canon 5D Mark II, 5D Mark III, 5D Mark IV, 1Ds Mark III, 1D Mark IV, 1D Mark III, 6D, 7DII, 7D 60D 50D 40D 450D 500D 550D 600D 650D 700D 750D 800D 850D 1000D 1100D 1200D 1300D. B:The EOS DSLR Camera. Without external flash control manual. Canon 5DIV 5DIII 5D II 5D 10D 20D 30D 300D 350D 1D 1D Mark II Compatible Flash: (You should use it with YN-622C together).
ETTL Flashes support TTL function and HSS: (It supports wireless remote control through camera menu). Canon 600EX-RT, 580EX II, 430EX II, 320EX, 270EX II ---Yongnuo Flashes Canon version: YN-568EX, YN-565EX, YN-468II, YN-467II, YN-465 ---Other brand flashes work with Canon system: Metz, Sunpak, Oloong, Triopo.
B: ETTL Flashes support TTL function and HSS: (Uers should set the flash through flash panel). Canon 580EX, 550EX, 540EZ, 430EX, 430EZ, 420EX, 420EZ, 380EX.
C: Other Flashes: (Not support TTL function or HSS). Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24 ---Yongnuo YN-560II, YN-560, YN-460II, YN-460 ---Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT ---Sigma EF-500 DG Super, EF-500 DG ST, EF-430 ---Other brand flashes not for Canon: Metz, Sunpak, Oloong, Triopo.
ECheque will be help out until cleared. Please pay what you win in 7 days. We will cover the cost if sending replacement/repaired items. We strive to deliver 5-star customer service.We will solve the problem until you are satisfied. And our company is closed on Sunday and public holiday. We believe that everything could be solved by communication. Feedback is simply what we pursue.
We will do our best to serve you. Please do not worry if there has any problem. The item "Yongnuo YN568EX III HSS Master Flash & YN622 Trigger Controller for Canon Nikon" is in sale since Monday, March 12, 2018.
This item is in the category "Cameras & Photo\Flashes & Flash Accessories\Flashes". The seller is "yinlen-us" and is located in shenzhen. This item can be shipped worldwide.