Flash Trigger Nikon

Yongnuo TTL YN622NTX +2PCS YN-622NII flash trigger with 2 cables for Nikon

Yongnuo TTL YN622NTX +2PCS YN-622NII flash trigger with 2 cables for Nikon
Yongnuo TTL YN622NTX +2PCS YN-622NII flash trigger with 2 cables for Nikon
Yongnuo TTL YN622NTX +2PCS YN-622NII flash trigger with 2 cables for Nikon
Yongnuo TTL YN622NTX +2PCS YN-622NII flash trigger with 2 cables for Nikon
Yongnuo TTL YN622NTX +2PCS YN-622NII flash trigger with 2 cables for Nikon

Yongnuo TTL YN622NTX +2PCS YN-622NII flash trigger with 2 cables for Nikon    Yongnuo TTL YN622NTX +2PCS YN-622NII flash trigger with 2 cables for Nikon
YONGNUO YN-622NTX+ 1PCS YN622NII Wireless TTL HSS 1/8000S Flash Trigger for Nikon (with 2 cables). This listing contains one YN622N-TX controller and SINGLE YN622N. One controller can be used with several transceivers, supports wireless trigger the hot shoe flash, outdoor flash or studio flash, the typical applications of wireless triggering the TTL hot shoe flash are as below. YN-622N-TX transmitter acts as a master control unit.

To the YN-622NII ITTL and Remote Manual transceivers, providing more functions and a far more user friendly built-in LCD user interface. Also adding a USB port for firmware updates. Which is major advantage over the current triggers. The improved YN-622N-TX also enhances stability, as well as improving information transmission speeds.

BELOW IS THE Features OF YN-622N-TX. Mix TTL, Remote Manual, and SuperSync Groups. 3, Syne mode front-curtain syne, rear-curtain sync, Hi-speed sync (Auto FP). 5, Trigger Interface: Hot shoe, PC.

6, Individual 1/3rd stop Manual Power and FEC adjustment. 7, Remote Flash Zoom in 3 groups, and Auto Zoom. 2nd Curtain Sync, HSS, SuperSync. 9, USB port for Firmware Updates.

11, Remote Shutter Release Function. 12, Dedicated Buttons for Fast Adjustments.

2.5mm shutter release interface (We have two cables, one is for N1, other is for N3). 17, Improved Stability and Transmission Speed.

18, SuperSync Manual Timing Adjustment by Group. 19, Flash Value Lock function (FVL). 20, Modeling Flash & Red-Eye Reduction flash. 22, Up To 100M Range. The new upgrade version YN622N II supports receiving the trigger signal of the YN560-TX/RF605(603MODE)/RF603II Series products , with multiaspects improved, equipped with quick lock design and supports USB firmware upgrade.

Supports "622" communication mode, "603-RX" communication mode. Compatible flash mode: i-TTL, Manual flash. Compatible Shutter sync: front-curtain sync, rear- curtain sync and high-speed sync(HSS/FP), the highest sync speed is 1/8000s. Support remote set the parameters of flash through the transceiver (Remote Control Mode).

Support i-TTL/Manual/Repeating flash mode mix using(Mix Control Mode). Support the flash installed on transmitter(on-top flash)and supports i-TTL function. Support the use of master unit on transmitter sets the parameters of each group(Master Control Mode). Support modeling flash and red-eye reduction flash.

Built-in AF assist beam emitter (AF Lamp). Compatible with YongNuo/ Nikon series flashes. Support PC port triggering strobe flashes. PC port support front/rear curtain sync and high-speed sync(Super Sync)function.

Support single-contact of camera & flash triggering (max sync speed is 1/250s). Nikon: D70 D70s D80 D90 D200 D300s D600 D700 D800 D3000 D3100 D3200 D3300 D3400 D5000 D5100 D5200 D5300 D7000 D7100 D7200. Flash compatible (i-TTL): (You should use it with YN-622N together). A: ETTL Flash: (It suport wireless remote control through camera menu). Nikon SB-910, SB-900, SB-800, SB-700, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24.

Yongnuo Flashes Nikon version: YN-568EX, YN-565EX, YN-500EX, YN-468II, YN-467II, YN-465. Other brand flashes working with Nikon system: Metz, Sunpak, Oloong, Triopo. B: Other Flashes: (Not support TTL function or HSS). Yongnuo YN-560III, YN-560II, YN-560EX, YN-560, YN-460II, YN-460.

Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT. Sigma EF-500 DG Super, EF-500 DG ST, EF-430.

Other brand flashes not for Nikon: Metz, Sunpak, Oloong, Triopo. 1 x LS-2.5/N1 Shutter Connecting Cable. 1 x LS-2.5/N3 Shutter Connecting Cable. 1 x Manual in Chinese and English.

United States / United Kingdom / Australia. May take up to 4-6 weeks due to strict Custom Inspection. Italy / France / Spain / Germany/ Eastern Europe. This information is provided by the carrier and excludes weekends and bank holidays.

When the parcel reaches you, please do check all the parts and goods quantity inside before signing it. It is legal and reasonable request.

We will be not responsible for any claim on missing items and damaged goods request. The same terms apply to anyone signed the parcel for you. We reserve the right to make the final decisions in event of any dispute.

We offer 1 year warrenty for this unit. The item "Yongnuo TTL YN622NTX +2PCS YN-622NII flash trigger with 2 cables for Nikon" is in sale since Thursday, August 25, 2016. This item is in the category "Cameras & Photo\Flashes & Flash Accessories\Other Flashes & Flash Accs".

The seller is "jianisi-equipment" and is located in default. This item can be shipped worldwide.

  • Brand: YongNuo
  • MPN: Does Not Apply
  • Compatible Brand: For Nikon
  • Model: YN-622N
  • YN-622CTX controller: HSS 1/8000


Yongnuo TTL YN622NTX +2PCS YN-622NII flash trigger with 2 cables for Nikon    Yongnuo TTL YN622NTX +2PCS YN-622NII flash trigger with 2 cables for Nikon