150W modeling lamp adjusts from 5% to 100%. Precise output displayed on LCD panel. Anti-preflash function enables synchronization with cameras that have a one-preflash firing system.
Outstanding output stability, no more than 2% shifts when under the same ouput. Auto memory and recovery of adjusted panel settings. Power output control: OFF, 1.03.0? Modeling lamp level: 9 levels(L1 to L9). Triggering method: Sync cord, test button, slave triggering, wireless control port.
Flash duration: 1/2000 to 1/8000s. Package size: 44 27 21.5cm / 17.3 10.6 8.5in.
Package weight: 2871g / 6.33LB. Godox X1T-C TTL Wireless Transmitter.Godox first TTL wireless flash trigger X1C applies to Canon EOS series cameras. Featuring multi-channel triggering, stable signal transmission, and sensitive reaction, it can be used to trigger camera shutter, studio flash and camera flash. X1C is compatible with market-available cameras which support E-TTL II. With 2.4G wireless transmission system, X1C (for Canon) can be used to trigger camera flash, studio flash and camera shutter over 100 meters' distance. Fully support TTL functions, support for E-TTL II auto flash, manual flash, 1/8000 high-speed sync, flash exposure compensation, flash exposure lock, modeling flash, etc. With wireless grouping system max. 5 groups & 32 channels to satisfy various shooting requirements.
Other functions satisfy various requirements, such as Delay Set, Wireless Shutter Release, Zoom Setting, etc. Equipped with LCD panel to offer convenient operation. Transmitter uses a PC port to input and output.Use the Micro USB port to firmware upgrade. Canon EOS cameras(E-TTL II autoflash). Support all cameras that have PC sync socket. 2.4 G wireless transmission. Support, ±3 stops 1/3 stop increments.
Support, fired with cameras depth of field preview button. In TTL mode, Ratio off. In M mode, Flash Ratio(A B C). In the GR grouping mode, 5 (A/B/C/D/E). In the Ratio grouping mode, 3(A/B/C).Support (0-10ms, set in unit of 100us). Receiver can control cameras shooting through 2.5mm shutter release interface. The focal length can be adjusted through the transmitter.
Wide LCD panel, backlight on/off. Transmitter: use a PC port to input and output. Receiver: use a 2.5mm sync cable to output. Use the Micro USB port to upgrade.
Settings will be stored 2 seconds after last operation and recover after a restart. ALL accessories must be unused; ALL accessory packages must be unopened. ALL items must be intact and undamaged (except for defects in manufacturing). Items must be in good conditions with all original accessories, manuals, and packing materials.
Any missing parts or damaged items will result in rejection on the return. In case of any defectives found, only defects in manufacturing are accepted as the reason of return. Our customer service officers will gladly contact you for further arrangement upon your request. In the case of return, please be sure to include ALL the original contents (including gift, packages and manuals).
Please also make sure that the return package is securely packed, and apply waterproof packing instruments wherever necessary. We will try our best to avoid such situations, however, please understand that some of these situations are beyond our control, and we are not reponsible for them. Feedback is very important to us. It is impossible to address issues if we do not know about them!
You will find many excellent and affordable items here! The item "US 800W 2x Godox SK400II 400W 2.4G Studio Flash Strobe Light +Trigger F Nikon" is in sale since Tuesday, September 19, 2017. This item is in the category "Cameras & Photo\Flashes & Flash Accessories\Flashes". The seller is "lejodigitalus" and is located in San Leandro, California. This item can be shipped to United States.