2 x Use Manual(Chinese & English) about Pixel M8 flash. 1 x Pixel TF-362 Transmitter for Nikon.
Note:The battery is not include. Pixel M8 is a high performance speedlite which guide number up to 60.
Full power recycle time within 3sec. Compatible with all speedlite with hot shoe connection. Built-in wireless module which available to triggered by KingPro and PAWN(TF-36X series)transmitter. M8 Using Multi dot matrix temperature control to avoid over heat or flash tube burnt or component problem, Using high definition dot matrix screen, all function shown on the display. This dial selector is applied to adjust setting parameter of the flash.
Turn left to reduce setting paramenter, and turn right to increase setting parameter. WL Wireless Receiver Mode Button.Press and hold WL button enter to wireless receiver mode which available to pair with KING PRO and PAWN(TF-36X SERIES)transmiteter. The speedlite does not need the use with receiver, Press and hold WL button to exit the wireless receiver mode.
Press -/+ button to set the flash power, set MULT flash output in MULT mode. ZOOM button to set the different focal length by manually.
Focal length between 20-200mm, Some of the camera model do not support the higher focal length which is according to the camera. The 20-200mm range is correctly to display, if the number out of the range;that will be an error. For lock the speedlite button, avoid the setting being to change unexpectedly. MODE is for changing different flash mode which available to set Mmanual mode and MUL multi flash mode.Manual flash mode set the power between 1/128 to 1/1 full power in 1/3 increment. Flash power adjustment is set by dial selector;rotate left to reduce the power, rotate right to increase the power. MUL Flash mode can make one image displays as a serial continuous moving image. You can set flash output power, falsh times and flash frequency. The number of flash firing is the number of times the flash fires per frame. The frequency of flash firing is the number of times the flash fires per second. Set cameras shutter speed when uing MULT mode. Calculate the shutter speed by using following formula, and then set camera shutter speed less than that of calculate by the formula. Shutter speed+the number of flash firfing/the frequency of flash firing.
For EXAMPLE, if the number of flash firfing is 10(times), the frequency of flash firing is 5(Hz). Then set the shutter speed over 2 second. You may also set Bulb mode.
MULT frequency can set as 1-500Hz. Frequency setting is subjiect to camera.Some cameras do not support higher. Allow a rest time of the falsh at least 15 mins. If you fire more than 0 continuous flashes, the safety function may activate and restrict flash firing. If this happens, please allow a rest time of the flash at least 15mins. It's applied to connect camera with SYNC cable or trigger flash.
Manual Zoom:According to camera or flash setting to adjust the zoom range. Adjustable Angle: Up/down: -7/90 degree.Manual Flash: 1/128-1/1 output control (1/3rd increments). Recycle Time: About 3sec(1/1 full power output). LCD Display Screen: High definition dot matrix screen. Internal Power Source: 4×AA size alkaline batteries or rechargeable batteries (4×1.5V). External Interface: Hot shoe, PC port, USB port, external power port. Number of flashes: 180 times (1/1 flash output, with Sanyo Eneloop batteries). Fluorescent tube: Ultra-long battery life design. Overheating Warning: Multi dot matrix temperature control, battery and flash tube overheating warning. Dimension: 78.04mm×60.50mm×193.00mm. Weight: 408.7g (excluding batteries)
Using the reflector enables you to reflect light in a person's eyes and create a more vivid expression. When using, pull out the reflector and wide panel together, and push back the wide panel. Then you may use the reflector. Using wide panel, flash coverage range will enlarge.
When useing, pull out the reflector with wide panel together, and push back reflector. Then you may use the wide panel. M8 speedlite is built-in the wireless receiver module which compatible with King Pro transmitter and Pawn(TF-36X series)transmitter, no need to put the receiver with the speedlite. Press and hold WL wireless button enter to SL wireless receiver mode, then press MODE button to choose King Pro receiver or Pawn TF-36X receiver mode.Using with King Pro transmitter only support manual flash mode. This is not compatible with King Pro TTL mode. Press and holdWL enter to SL wireless receiver mode, repeatedly press MODE button to choose King Pro receiver or Pawn TF-36X receiver mode. Dispaly will show King Pro which means King Pro reveiver after you choose King Pro receiver mode(Figure 1). Channel and Grop must be same as King Pro transmitter otherwise the transmitter can not communicate with the speedlite. Press SETWL and rotate the dial selector to change the channel and group. (CH1)as a channel icon, channel setting bewtween CH1 CH15,15 channels in total. (RATIO) as a group icon to set A/B/C three groups. M8 speedlite flash power available to controllered by King pro transmitter when speedlite using with King Pro transmitter, but the speedlite will not show the correct flash power. Only support flash power control. Press and holdWL enter to SL wireless receiver mode, repeatedly press Mode button to choose king pro receiver or Pawn TF-36X receiver mode. Display will show Pawn TF-36X which means Pawn TF-36X receiver after you choose Pawn TF-36X receiver mode(Figure 2).
Channel and group must be same as Pawn(TF-36X)series transmitter otherwise the transmitter communicate with the speedlite. (Ch1) as a channel icon, channel setting bettween CH1CH15,15 channels in total. Under Pawn TF-36X receiver mode, press -/+ button to adjust the flash power. USing with King Pro transmitter or Pawn TF-36X transmitter, which doesn't concern Canon/Nikon/Sony modeo.
ModeFNL:Namely gently press slave mode. Press and hold to enter FN function setting. When an error occurs on the flash or overheating protrection is activated the following infomation will display on the screen. Motor Error, Battery and flash head overheating prompt. Warning:Motor error lamp temperature.
When a prompt occurs on flash motor and unknow error , you are advised to swithch on-off the flash repeatedly to make it self-recovery. After recovery, the prompt info will disappear and you can reuse it. If not, you are advised to contact the deaier for repair. When you use the flash continually, flash head and battery overheating protection will be activated, then the LCD display screen will shows error prompt and restrict dlash firing. Now please trun off the flash and allow a rest time for reuse.
Then the prompt info will disappear, and you can reuse it. Pixel TF-362 Transmitter For Nikon. Pawn(TF-362) is for Nikon. It has the function of triggering flash and studio light and wireless shutter control.The highest sync speed is up to 1/250s. The functions of shutter control are single shoot, continuous shoot, bulb shoot and four seconds delayed shoot. Pawn For Canon is a wireless Flashgun remote control for Canon Camera. Pawn For Canon is multi-function wireless shutter remote control, and flash trigger function. FSK modulation used to improve the reliability and stability of the product, use the free worldwide 2.4GHz frequency. Available to shoot with single, Bulb, continuous, delay mode. With "wake-up" function, which can wake up the flash under sleep mode; guarantee to shoot each picture. Changeable connecting cable for difference camera model. With saving power function, the transmitter is only use 3mA under working status. Receiver is only use 2mA under working status. Battery working hour is up to 400hrs when using 2pcs of AAA alkaline battery. More than 10X compare with the similar product. Low-voltage design, and available to use rechargeable battery. Multi-power design, which can be use this via power socket. Shutter speed up to 1/250S.
(Depend the camera model, some camera are only support 1/250S or lower). Type: FSK 2.4GHz Wireless System.
Transmitter Stand-by Time:25000 hours (CR-2 lithium-ion battery). Transmitter Measurement (L W H) :66 X 37.5 X 28.5 MM. Please make sure your address is correct.>>>Australia, South East Asia and Asia. >>>United Kingdom, United States and Canada. >>>Europe, South America, Middle-East Asia. >>>Italy and Brazil (because of strict custom inspection).
Please make sure it is correct. We believe our items are so outstanding. All products are quality checked.We will be happy to resolve any issues you may have in a cordial and friendly manner. We appreciate your Postive Feedback, and will do the same in return. Thanks for your supporting our store. The item "Pixel M8 USB firmware update Wireless Flash+TF-362 Wireless Flash Trigger For N" is in sale since Wednesday, November 29, 2017. This item is in the category "Cameras & Photo\Flashes & Flash Accessories\Flashes". The seller is "rikonhk" and is located in shenzhen. This item can be shipped worldwide.