Build-in 2.4G wireless transmission offers all-in-one functions and 100 meters further transmission distance. Function include TTL autoflash, Manual Flash, 1/8000s High-speed sync, Flash Exposure Compensation, Second Curtain Sync, etc. As a master flash unit to control Sony camera flashes e.HVL-F60M, HVL-F43M and HVL-F32M via wireless. As a slave flash unit under control of Sony camera flashes e. Powerful & Convenient Li-ion Battery. 1.5s recycle time & 650 full power pops. 2000mAh lithium batteries ensure better shooting performance. Auto/Manual zoom head from 20 to 200mm. Allow for USB firmware update. Compatible Camera: Nikon DSLR Camera (i-TTL autoflash). Flash Coverage: Manual/Auto Zoom (20-200mm) (14mm with wide panel). Swivel / Tilt flash head (bounce flash): 0360°horizontally and -7°90°vertically. Flash Duration: 1/300 to 1/20000 seconds.
Exposure control system: i-TTL autoflash and Manual flash. Multi Flash: Provided (up to 90 times, 100Hz).
Flash Exposure Compensation (FEC): Manual FEB: ±3 stops in 1/3 stop increments (Manual FEC and FEB can be combined). FE Lock (FEL): Yes, with FV button. Sync mode: High-Speed Sync (up to 1/8000 seconds), First Curtain Sync, and Second Curtain Sync. Wireless Flash Function: Master, Slave, Off.Controllable Slave Group: 3 (A, B, and C). : Optical: Indoors: 12 to 15 m / 39.4 to 49.2 ft. Outdoors: 8 to 10 m / 26.2 to 32.8 ft.
Master unit reception angle: ±40° horizontally, ±30° vertically. Channel: Optical: 4(1, 2, 3, and 4); 2.4G: 32 (1-32). Slave-Ready Indicator: Yes, two red indicators blink.
Modeling Flash: Fired with camera's depth-of-field preview button. Auto Focus Assist Beam Effective range approx. : Center: 0.6-10m/ 2.0-32.8 feet; Periphery: 0.6-5m/ 2.0-16.4 feet. Power Source: 11.1V/2000mAh Li-on polymer Battery. Recycle Time: <1.5 seconds.Red LED indicator will light up when the flash is ready. Power Saving: Power off automatically after approx.
90 seconds of idle operation. (60 minutes if set as slave). Sync Triggering Mode: Hotshoe, 2.5mm sync line, Wireless control port.
Panel: Wide LCD panel, backlight on/Off. Size: 64 x 76 x 190 mm. Type: For Nikon Compatible with: Nikon cameras(E-TTL II autoflash); Support all cameras that have PC sync socket Build-in Remote System: 2.4 G wireless transmission Modulation Method: MSK Power Supply: 2AA batteries. Manual Flash: Support TTL Auto Flash: E-TTL II TTL Control: High Speed Sync (HSS): Support Flash Exposure Compensation (FEC): Support, ±3 stops 1/3 stop increments Flash Exposure Lock (FEL): Support Focus Assist: Manual open Rear Curtain Sync: No Modeling Flash: Support, fired with cameras depth of field preview button.Wireless Function: in TTL mode, Ratio off; in M mode, Flash Ratio(A B C); Support GR (grouping flash) Controlled Slave Groups: in the GR grouping mode, 5 (A/B/C/D/E); in the Ratio grouping mode, 3(A/B/C) Transmitter Distance: >100 meters Channel: 32 channels. Synchronization Delay Set: Support (0-10ms, set in unit of 100us) Wireless Shutter Release: Receiver can control cameras shooting through 2.5mm shutter release interface Zoom Setting: The focal length can be adjusted through the transmitter Display Panel: Wide LCD panel, backlight on/off Output Interface: Transmitter: use a PC port to input and output; Receiver: use a 2.5mm sync cable to output Firmware Upgrade: Use the Micro USB port to upgrade Memory Function: Settings will be stored 2 seconds after last operation and recover after a restart Transmitter Size/ Weight: 72x75x52(mm)/100g. Godox XPro-N 2.4G TTL Wireless Flash Trigger. XProN TTL Wireless Flash Trigger can not only control the flashes with built-in Godox wireless X system, e g camera flashes, outdoor flashes and studio flashes, but also can control the Nikon original flashes when using in combination with X1R-N receiver.
Featuring multi-channel triggering and stable signal transmission, this flash trigger applies to hotshoe-mounted Nikon series cameras. Built-in Godox 2.4G Wireless X System & Versatile Using Methods.
As a wireless Godox Flash Trigger/ wireless Shutter Release Trigger/ wireless Nikon Speedlights Trigger/ Flash Trigger with 2.5mm Sync Cord Jack. Support i-TTL Autoflash and Professional Functions. 16 groups and 32 channels to wirelessly control and trigger Add 01 to 99 wireless ID settings, which can only achieve triggering when the channels and wireless IDs of the master and slave unit are set to the same, avoiding signal interference effectively. Fully support TTL autoflash, 1/8000s high-speed sync, multi flash, manual flash, flash exposure compensation. TCM transform function, magnification function, one-shoot & multi- shoot setting, group modeling lamp control, group zooming, adjusting all groups1 output value simultaneously, etc.Outstanding Design, Easy Operation and Great Portability. Extra-large LCD panel, 5 group buttons and 4 function buttons offer convenient manipulation. XProN is quite portable for it only weighs 80g.
Support Type-C USB firmware upgrade and wireless triggering by 2.5mm sync cord jack. This flash trigger can be used on the following Nikon series camera models. D5 D4 D60 D70S D90 D100 D200. 0300S D300 D500 D610 D7C0 D750 D800. D810 D3100 D3200 D3300 D5000 D5100 D5200.This flash trigger can be used to control the following flashes models. V860II series/ V850ll /TT685 series. QTII/SK II series /DP II series/GSII. As there are so many camera flashes in the market which are compatible with Nikon speedlite we do not test one by one. The flashes with Godox wireless USB port. The flashes with Godox wireless USB port can only be triggered. GT/GS series Smart flash series. Compatible cameras: Nikon series cameras (i-TTL autoflash)Support for the cameras that have PC sync socket. Power supply : 2'AA batteries. 3 stops in 1/3 stop increments. Modeling lamp: Control the modeling lamp by the flash trigger.
Beeper: Control the beeper by the flash trigger. Wireless setting: The receiver end can control the camera shooting through the 2.5mm sync cord jack. ZOOM setting: Adjust the ZOOM value by the transmitter. TCM function : Transform the TTL shooting value into the output value in the M node.Firmware upgrade : Upgrade through the Type-C USB port. Memory function: Settings will be stored 2 seconds after last operation and recover after a restart. Display: Large LCD panel, backlighting ON or OFF. 1 x Godox V860II-N flash. 1Godox XPRO-N Transmitter for Nikon. We DO NOT accept payments by cheque. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. We will inform you if we need more time to prepare the items. As usual, it take 20 to 45 days to reach your designated address by HK Post. If you are not satisfied, please kindly let us know.
Your constructive advice will be our motion to revise and improve, thank you for your understanding. We will reply you within 24 hours.
The item "Godox V860II-N TTL HSS Wireless Flash + Xpro-N Trigger Kit For Nikon Camera" is in sale since Wednesday, March 7, 2018. This item is in the category "Cameras & Photo\Flashes & Flash Accessories\Flashes".
The seller is "xianghuistoreonline" and is located in HongKong. This item can be shipped worldwide.