Godox X1T-S TTL 2.4GHz Wireless Transmission With Screen Flash Trigger Multiple functions Only the. With build-in 2.4G wireless transmission system, X1T-S transmitter can remote control the Godox flashes which has build-in. 2.4G wireless X system.When using in combination with XTR-16 or XTR-16S receiver, X1T-S transmitter can remote control the Godox flashes which. Do not have build-in 2.4G wireless X system. Fully support Sony TTL functions, support for TTL autoflash, 1/8000 High-speed Sync, Second Curtain Sync, Flash Exposure. Compensation, Flash Exposure Lock, Modeling Flash Control, etc. US Godox TT685S 2.4G HSS TTL II GN60 Flash+ X1 TTL Wireless Trigger for Sony. With GR group flash and wireless grouping system max. 5 groups & 32 channels to satisfy various shooting requirements. With big and clear LCD panel to offer convenient operation. Other versatile functions satisfy various requirements, such as Synchronization delay setting, Wireless Shutter Release.
Transmitter with a PC sync socket to input and output. USB firmware upgrades to helps keep pace with latest technology. Useful memory function that settings will be stored 2 seconds after last operation and recover after a restart. X1T-S supports Sony MI Shoe, which is compatible with For Sony cameras e. A77II, a7RII, a7R, a58, a99, ILCE6000L, etc.
For Sony EOS cameras(E-TTL II autoflash). Support for the cameras that have PC sync socket. Yes(±stops in 1/3 stop increments).Yes(Fired with camera's depth-of-field preview button). In TTL mode, ratio off. In M mode, flash ratio(A:B C). Support for GR group flash, A-E group can set their flash mode separately. In the GR grouping mode, 5(A/B/C/D/E). In the Ratio grouping mode, 3(A/B/C).
Yes(0-10ms, use 100 as the unit). Adjust the flash's focal length through the transmitter. Use a PC cord to input and output. Use the Micro USB to upgrade. Settings will be stored 2 second after last operation and recover after a restart.
7.5 7.3 4.5cm / 3.0 2.9 1.8in. 10.5 10.5 5.3cm / 4.1 4.1 2.1in. The Camara is not included. Only X1T-S transmitter is included. 1/8000S, front and rear curtain sync, FEC, Multi flash, Manual flash, TTL/M/Multi/S1/S2 modes, 20-200mm auto/manual zooming etc.
GN60, 22 steps of power output(1/11-128); Approx. S recycle time, 230 full power flashes(using 2500mA Ni-MH batteries). Optical transmission with even illuminatin and stable output. 2.4G wireless trnasmission with all-in-one functions and 100 meters further transimission. With dot-matrix LCD panel to offer clear and easy operation.
Use 4 function buttons to change various settings according to different situations. TT685S is compatibe with S0ny Wireless Lighting System(WL). As a mster unit TT685S can control S0ny cameras flashes e. HVL-F60M, HVL-F43M and HVL-F32M via wireless. As a slave unit, TT685S can be controlled by wireless signals of S0ny camera flashes e.Specifications Compatible Cameras: S0ny DSLR Cameras(TTL autoflash) Guide No. FEB: ±3 stops in 1/3 stop increments Manual FEC and FEB can be combined.
Sync mode: High-speed sync (up to 1/8000 seconds), first-curtain sync, and second-curtain sync multi flash: provided (up to 90 times, 100Hz) Wireless Flash Wireless flash function: Master, Slave, Off Controllable slave groups: Optical(2, A and B); 2.4G(3, A, B and C) Transmission range approx. 100M -Optical Indoors: 12 to 15m / 39.4 to 49.2 ft. Optical outdoors: 8 to 10m / 26.2 to 32.8 ft. Master unit reception angle: ±40°horizontally, ±30°vetically Channels: Optical 4(1,2,3,4); 32 (1-32) Slave-ready indicator: Tow red indicators blink Auto Focus Assist Beam Effective rangeapprox. : Center: 0.6-10m/2.0-32.8 feet, Periphery: 0.6-5m/2.0-16.4 feet Power Supply AA Batteries: Ni-MH batteries(Recommended) or 4LR6 Alkaline batteries Recycle time: Approx.0.1-2.6 seconds(enel00p Ni-MH batteries of Panas0nic). 230 (2500mA Ni-MH batteries) Power saving: Power off automatically after approx. 90 seconds of idle operation. (60 minutes if set as slave) Sync Triggering Mode: Hotshoe, 3.5mm sync line, Wireless control port Color Temperature: 5600±200k Dimensions: W X H X D: 6476190mm Weight without battery: 410g. Flash Bracket D Type Umbrella Holder Swivel Light Stand For Hot-shoe Flash Light.
This unit can be combined with any light stand, tripod, ballhead, flash gun, flash trigger or other similar items. Attached to your light stand, insert your flash unit and umbrella and adjust your mount so it is at an optimum angle for. 360 degree angle ballhead allows you to change the angle smoothly.The hot shoe on the top is made of plastic which can prevent scratching on the flashes. The holder body is made of metal, strong enough to hold flashes, large load capacity, durable and steady. On the top, there is a hot shoe flash mount. It is fit for all flash guns/Speedlite with standard hot shoe socket. Flash mount was connected on this flash holder by metal screw.
That is very stable and safe for your flash guns/Speedlite. There is a hole in the middle of this item so that you can insert a lighting umbrella and align it with the flash. 1/4" socket and 3/8" metal hotshoe foot on the top, for attachment to other photograhic accessories. Bottom 5/8 socket to connect with light stand. Material: Anodized Aluminum Metal and Plastic.
Suitable for Most flashes, except Sony Minolta falshes. 1x TT685S Camera flash 1x Mini stand 1x Protection bag 1x User Manual. 1x Godox x1t-s Trigger Transmitter for Sony. 1x 360° Swivel Flash Shoe Umbrella Holder Bracket. Usually the goods will be delivered from our.
We will try our best to avoid such situations, however, please understand that some of these situations are beyond our control, and we are not reponsible for them. ALL accessories must be unused; ALL accessory packages must be unopened.ALL items must be intact and undamaged (except for defects in manufacturing). Items must be in good conditions with all original accessories, manuals, and packing materials. Any missing parts or damaged items will result in rejection on the return. In case of any defectives found, only defects in manufacturing are accepted as the reason of return. Our customer service officers will gladly contact you for further arrangement upon your request. In the case of return, please be sure to include ALL the original contents (including gift, packages and manuals). Please also make sure that the return package is securely packed, and apply waterproof packing. Feedback is very important to us. It is impossible to address issues if we do not know about them! You will find many excellent and affordable items here! Camera Shoulder Neck Strap For Nikon Canon Pentax olympus Pansonic Casio Fuji. 110cm 43 5in1 Collapsible Portable Lighting Diffuser Round Reflector Studio. 1/4" to 3/8" Convert Male Screw Adapter Spigot Stud for Tripod Flash Light Stand. V Shape Triple Mount Hot Shoe Flash Bracket for Speedlite Camera Light Camcorder. Godox Protector Cover AD-S15 for WITSTRO AD-180 AD-360 Flash Lamp Tube Bulb. US Godox AD-S2+AD-S11+AD-S15+S Bracket+4040 Softbox Kit For AD200 AD360II Flash. Godox AD-S5 39 Fold Diffuser Reflector Soft Umbrella for AD200 AD360II AD360. Zhiyun Crane 3-Axis Handheld Stabilizer Gimbal for Mirrorless DSLR Video Camera.
US Godox 2.4G TTL HSS AD200 Flash+X1T Trigger +6060 Softbox +2m Light Stand Kit. US Godox 2.4 TTL HSS AD200 Flash +X1T-C+Extra Battery+BD-07 Barn Door For Canon. High Speed Flash Strobe Head. The item "Godox TT685S 2.4G HSS TTL Speedlite Speedflash X1T-S Trigger for Sony DSLR Camer" is in sale since Friday, June 03, 2016. This item is in the category "Cameras & Photo\Flashes & Flash Accessories\Flashes".The seller is "zeniko_online_store" and is located in San Leandro, California. This item can be shipped to United States.