2 x Yongnuo Wireless TTL YN-685 Speedlite HSS + YN-622N Flash Trigger for Nikon. Features Remote ControlSupports Remote Control the Parameters of Each Flash Group When YN685 used as slave unit, it supports remote control of the flash mode, flash output and focal length of each flash group through YN622N series transceiver or YN660/YN560IV/YN560-TX. Extended DisplayUsed as YN622N II control panel and LCD panel The YN685 can be set to 622 Ext. LCD trigger mode and then installed on the YN622N II acting as the control panel and LCD panel, makes the operation of the trigger more convenient. HSSSupports High-speed Synchronization When the HSS function is enabled, this speedlite can be used at all shutter speed, the maximum sync speed can reach 1/8000s.
Note: The function need the support by the camera and transceiver. The YN685 is 2.4GHz wireless high guide number speedlite, supports TTLMMulti mode. UpgradeSupports Firmware Upgrade Users can log in YONGNUO official website to download the latest firmware , to upgrade the speedlite via YN622N II, improve the performance of the product timely. ThemeTwo display themes are designed for YN685 YN685 supports numeric theme and classic theme , you can choose the one that is suitable for you. Charging RecycleUltra-fast Charging Recycle System, Supports External Power Supply It just take about 2 seconds at full output.Even if not use the brand new batteries, it just takes 35 seconds ultra-fast time to recycle; Besides, you can also use the external power supply to meet your higher requirement. Zooming Supports Auto and Manual Zooming Supports auto and manual zooming, the flash coverage can be changed between 20200mm. Sound Prompt Specific Sound Prompt System When the sound prompt system is enabled, the speedlite can prompt its working condition, allows you to focus on creative process.
Note: the sound prompt can be turned on/off. And Auto Save Settings Equipped with LCD display screen and standard PC sync interface.60meters (ISO 100, 200mm) Flash modei-TTL, M, MULTI Trigger modeset-top, 622 Ext. Slave, 603 Slave Circuit designInsulated Gate Bipolar Transistor(IGBT) Zoom rangeAUTO, 20,24,28,35,50,70,80,105,135 200mm Vertical rotation angle-790 degrees Horizontal rotation angle0360 degrees Power supply4×AAsize batteries (Alkaline or Ni-MH are usable) Lighting times1001500 times (AA alkaline cell used) Recycle timeApprox 2s (AA alkaline cell used) Color temperature5600k Flash time1/200s1/20000s Flash control8 levels of output control (1/1281/1), 29 levels of fine tuning External interfacehot shoe, PC port and eternal power interface Wireless triggering distance100m Additional featuresHigh-speed sync, second-curtain sync, FEC, FEB, FEV, the electronic flash head zooming, sound prompt, automatically saving setting, power saving mode, overheat protection, custom function setting Dimensions67×77×210mm (Extended state) Net weight426g Compatible with. 1 Hot shoe mode Nikon Camera D700, D300s, D300, D200, D90, D80 D4, D3x, D3s, D3, D2x, D800E, D800, D750, D700, D600, D300s, D300, D200, D7200, D7100, D7000, D90, D80, D5300, D5200, D5100, D5000, D3300, D3200, D3100, D3000, D60, D40, D40x. 1 Wireless Manual (RF-603 / RF-603 II mode) System YN622N, YN622N II, YN622N-TX, YN660, YN560IV, YN560-TX, RF605, RF603II and RF603 respectively ALL DSLR Standard Hot shoe Camera. YN-622N Specification -Yongnuo First Wireless i-TTL Flash Trigger YN-622N is Released now, it's designed for Nikon Camera.
Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, i-TTL (II), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres. It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, Modeling flash, iTTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp.
Main function Support Full iTTL Pass-through function when on camera Mount one YN-622N transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode. Mount flash on hot shoe of YN-622N transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or Multi mode. Note: Speedlites on hot-shoe of transmitter support iTTL II / Manual / Multi Shutter Sync High-speed Synchronous:The max. Sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't suport HSS, the sync. Speed is just 1/250s or less, different cameras have different Sync speed.
Remote Control Function: The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly. Supporting mixed mode: With this function, you can trigger remote speedlites in different modes, set up one YN-622N transceiver on hot shoe of flash in TTL mode, set up the second YN-622N transceiver on hot shoe of flash in manual mode, and the third YN-622N transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver on hot shoe of camera, this mode is especially useful for those camera bodies without a built-in flash menu.Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on the flash speedlite. Trigger voltage is less than 300 Voltage. Note: The PC port is for output using only. Awaking function: When half-pressing the shutter button of the camera, the hot shoe flash on the receiver will be awakened. (for those flash has wake up function) Zoom Function: Zoom Automatic: length will be changed depanding on the changes of lens. Zoom Manual: Zoom length is within 24 - 105mm Zoom Lock -Support Single-contact of camera and flash triggering the max. Speed is 1/250s : You can use it with Nikon camera or Nikon flash, but you just need to set up YN-622N in manual mode. Flash Fire Ratio with iTTL: You can set up different flash fire ratio and FEC for those flashs on hot shoe of receiver. Support 2pcs AA batteries, (1.2v rechargeable battery), Stand-by time is 60hours.
Dimension: 89.5 53 39MM, net weight is 78g. Note: There is a PC Sync port for YN-622N transceiver, you can use RF-602 PC / PC Cable to connect it with flash.Compatibility -Suit for (Camera) : Nikon D70, D70S, D80, D90, D200, D300, D300S, D600, D700, D800, D3000, D3100, D5000, D5100, D5200, D7000, D7100 -Flash compatible (i-TTL): SB400, SB600, SB700, SB80,0 SB90,0 SB910, YN465N, YN467N, YN468N(II), YN565N, YN568N. Package Include -2 X Yongnuo YN-685 Manual Flash for Nikon -1 X Yongnuo YN-622N Controller Trigger NOTE -- DON'T come with retail packing, Since Yongnuo not launch 1PC retail box.
We will send in sealed bubble bag. In event of a very unlikely slight delay, your patience would be highly appreciated. Your satisfaction is our primary concern and we will try to resolve every problem.
Our working hours is: (GMT+8) Monday to Friday 10:00am-7:00pm, Saturday:10:30am-3:30pm We close on Weekend and Public Holidays. The item "2 x Yongnuo Wireless TTL YN-685 Speedlite HSS + YN-622N Flash Trigger for Nikon" is in sale since Thursday, October 19, 2017. This item is in the category "Cameras & Photo\Flashes & Flash Accessories\Flashes".
The seller is "trytrybuy" and is located in HONG KONG. This item can be shipped worldwide.